Pixhawk Drone arming

[Hobbypower Pixhawk PX4 Flight Controller]

[HKPilot32 Flight Controller] [products]

[Logging blocking arming]

[PreArm: Logging failed]

Arming is failing and I’m down to these messages.

PreArm: Logging failed
Frame: QUAD
fmuv2 002A0037 3337510B 32343735
ChibiOS: ff603d11
ArduCopter V3.6.3 (63eb66fe)
PreArm: Logging failed
u-blox 1 HW: 00080000 SW: ROM CORE 3.01 (107888)
PreArm: Logging failed
PreArm: Hardware safety switch
EKF2 IMU1 tilt alignment complete
EKF2 IMU0 tilt alignment complete
EKF2 IMU1 initial yaw alignment complete
EKF2 IMU0 initial yaw alignment complete
GPS 1: detected as u-blox at 115200 baud
Frame: QUAD
fmuv2 002A0037 3337510B 32343735
ChibiOS: ff603d11
ArduCopter V3.6.3 (63eb66fe)
Barometer calibration complete
Initialising APM

There’s an arm check for logging that had to be disabled. Now arming works.